Marca: Zalman

Modelo: ZM-MFC3

Ventoinhas:
1 X 4-Pinos (Suporta fan com função PWM)
3 X 3-Pinos (suporta fan com controle de rotação)

Fan RPM Control:
200~6000RPM
PWM Regulation Method (Fan No.4)
Voltage Control Method (Fan No.1~3)

Corrente:
0.7A
Tensão de Saída:4~11 VDC
Tensão de entrada:12VDC/ 5VDC

Dimensões:
147(L) x 87(W) x 42(H) mm

Acessórios:
CVS (sensor da corrente / tensão)
Cabo da extensão do suporte / CVS
Sensor de temperatura
Cabo C3
Cabo Y
Cabo 4-Pin
Cabo 3-Pin
Quatro parafusos para instalação do ZM-MFC3
Parafusos para instalação do suporte
Manual de usuário 

Power Load Meter: Displays Power Load between 10 ~ 999W. Readings of 1 ~ 9W are shown as "Lo" and readings of 1000W+ are shown as "Hi".   Timer: Timer shows Computer usage time and resets when Computer is turned OFF.   RPM Display: RPM is displayed in units of 10RPM. Values of 200RPM and below are shown as "0". Values between 201 ~ 6000RPM are supported by the display.   Temperature Display: Displays temperatures between -9°C and 99C. Temperatures below -10°C are shown as "Lo". The Display will blink temperatures between 80 ~ 99.9°C and display "Hi" for temperatures above 99.9°C.   Fan Channel Display.   Jog Wheel: Jog Wheel is used for adjusting Fan RPM and selecting a Fan Channel. RPM can be set from 60 to 6000RPM in units of 60RPM.

Standard Fans (Fan 1~3): 3-Pin fans that support the RPM output function can be connected for use. PWM Fan : A 4-Pin fan that supports the PWM function can be connected for use.   Temperature Sensor: Four temperature sensors can be connected.   CVS Terminal: Receives the measured values of the CVS.   Power Connector: Connects with the PSU’s 4-Pin connector.

- One ZM-MFC3 - One CVS (Ampere/Voltage Sensor) - One CVS Extension Bracket - One Temperature Sensors - One C3 Cable - One Y Cable - One 4-Pin Cable - One 3-Pin Cable - One Bracket Screw - Four ZM-MFC3 Installation Screw - One User’s Manual